The led strip glue is made of epoxy resin. The main agent of this glue is 560A-407 and the curing agent is 560B-407.
Resin diamond cutting resin is a kind of abrasives and tools made of low temperature curing binder. Features: cutting processing, low calorific value, good self-sharpening, not easy to block, high surface finish of processed workpiece. Application: used in optical glass, glass tube, glass rod, quartz glass, glass fiber, semiconductor, hard alloy, ceramics, zirconia ceramics, circuit board (PCB) and other hard and brittle materials cutting or slotting.
It is mainly used for cutting or grooving ordinary glass, glass rod, glass Mosaic, ceramic plate, sapphire, stone slotting, semiconductor material, brake pad and other materials.
Advantages of electroplating diamond products ①Electroplating process is simple, less investment, convenient manufacturing; No need to repair, easy to use; The single layer structure determines that it can reach a very high working speed, which has been as high as 250 ~ 300m/s abroad; (4) Although there is only a single diamond, it still has enough life; ⑤ For roller grinding wheel with higher precision requirements, electroplating is the only manufacturing method.
Because of these advantages, high speed and ultra-high speed grinding with electroplated wheel occupies an undisputed dominant position.
The led strip glue is made of epoxy resin. The main agent of this glue is 560A-407 and the curing agent is 560B-407.
The characteristics of this glue are: 1. Soft and environmentally friendly epoxy resin glue, low viscosity, good leveling property, good defoaming performance; 2. Curing at room temperature or medium temperature, moderate curing speed; 3. Good transparency and flexibility of cured product Well, the surface is bright and flat, no bubbles; 4, the cured product has good waterproof and moisture resistance and solvent resistance.
This kind of glue is used in various LED strips, led strips, led strips, led strips and other products.
The color of the glue is a transparent liquid, the specific gravity is 1.07g/cc at a temperature of 25 ° C, 0.93 g / cc, the viscosity is 2350-2450 cps at a temperature of 25 ° C, 50-60 cps, and the shelf life is 25 ° C for 6 months. .
How to use: Mixing amount: 1:1, usable time: 40-50 minutes at 25 ° C (100 g weight mixing), curing conditions are: 16-18 hours at 25 ° C or 2 hours at 60 ° C.
Matters needing attention: the surface of the product to be glued must be dry; it must be carried out according to the proportion, and the weighing is accurate, remember the weight of the proportion rather than the volume, the main agent and the curing agent need to be fully integrated; Glue and do it in the available time to avoid waste; before using it in large quantities, use a small amount to avoid unnecessary losses caused by mistakes.
China Hardware Business Network http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Metal Bond Cutting Wheels,Diamond Cutting Blade,Wet Stone Cutting Wheel,Grinding Stone Cutting Disc
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com