Entrance decoration restaurant decoration The Installation of Mounting Unit Solar Mounting System For Green House Solar Panel Mounting Frames,Solar Panel Mounting Systems,Greenhouse Solar Mounting System,PV Mounting Systems Hebei Honde Plastic & Metal Co., Ltd. , http://www.foundation-system.com
First: Now that it is a market economy, some ideas in the past in the era of planned economy are no longer applicable. To find acquaintances is to save the price, but for acquaintances, he must also be able to survive in a favorable and feasible way. Above, you and he are still using and being used in nature.
Second: To find acquaintances is to save the price, but also can not discuss what the price is cheap. Because of the friendship, the general acquaintance's words seem to be cheaper on the surface, but wool is on the sheep. Some people on the price are often bullied. You will not be ashamed to bargain. How much money do you say, you will believe that? The money is also extremely fast, and it will be paid in one lump sum. If you are not satisfied with the renovation, you may be embarrassed to point out or deduct money. As a result, the renovation fee is not lower than others.
Third: Because it is an acquaintance, it is easy not to be wary of him. Decoration has always been a time-consuming and labor-consuming task. You are not happy to worry about it. So you need to find a trusted person to help you. The decorating company has found out what you are thinking about. Everything is done according to your opinions, but it is all caged. Unification, everything is not in place, the result is still you lose.
Fourth: In the process of construction, due to the acquaintances, you generally do not go to the construction site every day to supervise, but also embarrassed every day to supervise. In this process, it is very likely that there will be cases of cutting corners and shoddy goods, and the quality of some hidden projects will become even more worrying because the quality of the hidden projects will not be seen at once. The result is not at all easy.
1. Make the concrete base according to solution drawing, locate embedded bolts and set out strings by Laser Level to ensure the centers of embedded bolts in the same elevation as accurate as possible on vertical, horizontal direction and at end face.
2. Locate the Anchor Plate on the concrete base and adjust the position according to solution drawing(remove M14 washer,M14 spring washer,and M14 nut if they are connected to embedded bolts now),and then fasten M14 washer, M14 spring washer, and M14 nut with the tightening torque of 60N.m.
3.Take out the Hexagon Bolt Kit with Post B Corrugated Gasket M12x95 and remove its nut, spring washer, one washer, and corrugated gasket. Insert the Post A, B, C in to Anchor Plate according to the Hexagon Bolt Kit with Corrugated Gasket M12x95 drawing and then fix them by two sets of Hexagon Bolt Kit with Corrugated Gasket M12*95. Post C Post A
4.Remove the bolt kits M12*90 from all the Posts and Pre-Assembled Supports and unfold the embedded Supports, fasten them on the Posts by bolt kits M12*90 according to the drawing.
Installation of Rails
1.Please check the length of Beam before place it onto the Pre-Assembled Supports, otherwise extend it with Splice forBeam first. There are 4 self-tapping screws in each side and total 8 self- tapping screws in both sides. We strongly recommend NOT extend the Beams on Preassembled Supports.
2.Before locate the Beams, mark the position of the Beam son the surface of Pre-Assembled Supports with maker pens according to solution drawing for easier installation. Place the Beams on the 55*80 Tube of Pre-Assembled Supports and fix it with C Clamp Kits. Install all the Beams in the same step. The tightening torque will be 20N.m. C Clamp Kit Side Beam(Please arrange 3-4 persons to install when the array is long.)
Installation of Solar Panels
1.Place the panels above the Beam 85, fixing it with Wide End Clamp Kit in the side and Inter Clamp Kit in the middle. Install all the panels in the same steps until complete installation of al panels. Fasten all the bolts with tightening torque of 10N.m.
2.Complete installation, and please inspect and make sure all the bolts are fastened.
The best decoration is not to find acquaintances
As the saying goes: People are good at things. In fact, if you blindly believe in acquaintances when you decorate, you will get bored because of the following points: