• Model NO.: OS-C
.......

When machining 30 mm and 45 mm holes on the box parts shown in Figure 1 on a horizontal machining center, two machining schemes can be adopted due to the large difference in aperture between the two holes. Option 1: Firstly machine a 30 mm hole from the direction of the B direction, then ro.......

(1) Roughing NC program design The purpose of roughing tool path optimization is to improve the blank removal efficiency. Generally, high-speed contouring, drilling displacement or other methods are used to design the tool path. Machining plane A, in order to avoid overcutting of the tool, .......