Abstract: After the solid wood floor is laid, it must be used for at least 24 hours before it can be used, otherwise it will affect the use of solid wood flooring. Generally, solid wood flooring is poor in water resistance, and should not be wiped with a damp cloth or water to avoid tarnishing. The following Sina Home Channel will teach you how to properly clean and maintain solid wood flooring. After the solid wood floor is laid, it must be used for at least 24 hours before it can be used, otherwise it will affect the use of solid wood flooring. Generally, solid wood flooring is poor in water resistance, and should not be wiped with a damp cloth or water to avoid tarnishing. In the future life, we must maintain solid wood flooring, the specific measures are as follows: During daily use, care should be taken to avoid scratching the floor with heavy metal sharps, glass tiles, studs, etc.; do not drag the floor when moving furniture; do not let the floor touch open flames or place high-power electric heating directly on the floor. It is forbidden to place strong acid and strong alkaline substances on the floor; it is absolutely forbidden to immerse for a long time. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In the hot and humid weather, you can turn on the air conditioner or electric fan. The humidity in the room should not be too large, keep the floor dry and smooth, and use daily cleaning with a wringed cotton mop: in case of stubborn stains. Wipe with a mild detergent and wipe with a wrung cotton swab. Do not scrub with an organic solvent such as acid, alkaline solvent or benzine. In order to maintain the beauty of the floor and extend the life of the paint. It is recommended to wax twice a year. Wipe the floor clean before waxing, then apply a layer of floor wax evenly on the surface. After a while, wipe it with a soft cloth. Until smooth and bright. If large-area flooding occurs inadvertently or if it is partially soaked in water for a long time, if it is stagnant, it should be dried in a dry cloth and allowed to dry naturally. It is strictly forbidden to use electric heater to dry or expose to sunlight. Exposure to strong sunlight for a long time, or rapid rise and fall of temperature in the room may cause premature aging of the solid wood floor paint surface and should be avoided as much as possible. The installed place is not available for the time being. To maintain the circulation of indoor air, do not cover it with plastic paper or newspapers, so as to avoid the surface paint film becoming sticky and losing luster. Clean the floor regularly, vacuum, and prevent sand or frictional dust from accumulating and scratching the floor surface. A doormat can be placed outside the door to prevent sand or frictional dust from being carried indoors. You can use a dry cotton mop to clean the floor when you clean it. Do not wipe the floor with a wet mop or a corrosive liquid such as soapy water or gasoline. In order to increase the indoor air humidity in the autumn and winter seasons, humidifiers can be used to keep the indoor air humidity at 50% to 70%. When moving furniture, it should not be pushed and pulled directly on the floor. It should be lifted and moved gently. Frequently moving furniture can be glued to the bottom of the piece. Cleaning methods for special stains: oil stains, paints, and inks can be wiped with special stains; if it is blood stains, juice, red wine, beer, etc., you can wipe it with a damp cloth or a cloth with a proper amount of floor cleaner. Acid-base liquid cleans the wooden floor. * Plate FLANGE (Plate Flange, Flat Flange, Plain Flange) Backing Flanges,Backing Ring,Ring Flange, Backing Ring Flanges Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflanges.com
* SLIP ON FLANGE (SORF SOFF FLANGE)
* WELDING NECK FLANGE (WNRF FLANGE)
* BLANK FLANGE (BLIND FLANGE, BLFF FLANGE, BLRF FLANGE)
* THREADED FLANGE (SCREWED FLANGE)
*BACKING RING FLANGE