The door handle is broken, which affects the normal use of the door, and when the door is opened and closed, it will have an impact on the feelings of the living of friends. The replacement of the door handle can solve the problem as soon as possible. Today Xiao Bian will teach you how to change the door handle. Now let's take a look! How to change the door handle 1. First of all, remove the old door handle. The security door handle is removed from the room. Because the two screws holding the handle are inside, just remove the screw and it's OK. 2, when the demolition is very simple, open the door, press the outside with four fingers, the thumb press inside (can also help you press this point outside), use a screwdriver to remove the screw, pay attention! When you are about to get rid of it, use a little force to press it. Because there is a spring inside, you will accidentally pop it up or hit yourself. 3, after the screw is removed, slowly remove the handle, and then use the open pliers to open the snap ring on the handle, take out the handle, when doing this step must pay attention to safety, can not hurry to take it slow. Because I don't have open jaws at home, I didn't do this step, but this step is also very simple. 4. Put the new handle on and get the snap ring in place. This time it is basically completed. It's time to save up. Put the handle in its original position. 5, when installed must have patience, because there is a screw on the outside of the handle, the screw must be installed on the top, installed firmly, if you feel very expensive, you can find someone to help hold the outside of the handle, You slowly install it inside, as long as it is the one you have, and the other one is ready to be installed. Door door handle is broken, how to disassemble There are two kinds of locks with revolving door handles, and you can see the fixing screws and the outside cannot see the fixing screws. 1. If you can see the fixing screw, first remove the fixing screw of the tongue and then remove the bolt and then remove the screw on the room baffle (the fastening screw will only be outside the room in the room). You can see the internal fastening structure, the order of disassembly can be, and in some places there are special springs, to be prepared to remove the circlip pliers. 2, the outside can not see the lock to fasten the screw, first remove the screw bolt tongue, remove the tongue, in the room between the handle and the door lock lever has a small hole, you can use the buy lock is The accessories or to find a sharp object, insert the hole into the hole and pull out the head of the door handle. After the rotating head is unplugged, remove the fixed metal plate on the lock lever close to the door, and then you will see Fix two screws, remove the screws and fix the iron, and remove the entire lock outside the room. The door handle is broken. How to replace and install The friends can understand that when installing the door handle, it needs a certain amount of patience. Because the door handle has a screw sleeve, it must be aligned before it can be installed, and afterburner fixed This can be installed with the help of family members, which saves money and saves time. The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned. Door handle with loft how to decorate life coups home decoration how decoration loan how to apply Flame Retardant Material,White Antimony Trioxide Masterbatch,Antimony Trioxide Masterbatch Cas,Antimony Trioxide Masterbatch HUNAN ZHONGNAN ANTIMONY&TUNGSTEN TRADING CO.,LTD , https://www.znat.com.cn
