The effect can be so capricious! Plugging Ling brand absolutely love

Plugging spirits can bring water, and quickly stop the water plugging. The product is simple in construction, strong in adhesion to the grass roots, does not shrink, does not fall off, and can be widely used for plugging, sealing, repairing, and injecting of housing, underground, tunnels, and mines. The product is chlorine-free, non-toxic, non-flammable, and non-explosive. The following Xiaobian introduces the knowledge of the plugging spirit brand.

Plugging spirit is a kind of inorganic powder that solidifies quickly and generates early strength. Due to its unique micro-expansion properties, it has crack resistance and is an ideal fast-stop plugging and water stop material. The plugging spirit is used as follows:

1. First cut the leaking point or leaking seam into a vertical flare to clean debris and loose powder and moisten it with water.

2. Put one kilogram of quick-acting plugging agent into the pot or other stirring vessel, add 0.3~0.35 kilograms of water, and quickly mix the slurry. Below 5°C, it is advisable to stir with water above 20°C.

3. Put the well-blocking cement on the hands and feel that when the cement heat is hardened, it will quickly saturate under the direction of the leaking water. It can only be released after a certain period of time. Generally, it can block the water within 10 minutes.

4. After water is shut off, use a waterproof mortar to wipe the surface for 7 days.

5. For the seepage pit, the dry plugging agent powder can be directly put into the pit, and then be stepped on with the foot. After the hardening, the loose leg can be loosened.

6. For severe leakage joints, use drainage method to block the upper joint first, then block the lower joint, and finally block the drainage hole.

7. For large areas of leakage, to find the leakage point, first plug with quick-acting plugging agent, and then use waterproof mortar to wipe the surface.

Taisen series Taisun-401 fast hard plugging spirit:

Feature advantages

â—† Rapid solidification, instantaneous waterstop, high early strength, and micro-expansion properties.

â—† The setting time can be adjusted: The quick-setting type plugging spirit is used for instant plugging, and the slow plugging plugging spirit is used for plugging, waterproofing and bonding.

â—† Combined with the matrix, long life, excellent water resistance.

â—† It is an environmentally friendly product, non-toxic, harmless, and non-polluting.

â—† It can be used to meet the water surface and the operation is simple.

Scope of application

â—Ž Applicable to the repair of leaks in underground structures or structures.

â—Ž New and old buildings that are suitable for concrete structures are protected against moisture and seepage.

â—Ž Suitable for emergency repair of underground pipelines, dams, and equipment foundations.

â—Ž Suitable for bonding tiles, mosaics and other materials, so that waterproofing and pasting can be completed at one time.

Construction points

Type I plugging spirit use method:

â—Ž Non-water seepage surface construction should use "retarding type", gray water ratio of 1:0.3 to 0.5 for preparation, stirring time should not exceed 20 seconds, solidification time of about 5 minutes.

â—Ž Scrape the first layer of paint with a squeegee. After the coating has dried, moisten (no water) and then apply a second coat of paint. The coating should be even and slightly hardened so that the coating is denser and stronger.

â—Ž After completion, moisturize for about 3 days.

Type II quick-setting plugging spirit construction method:

◎ The base surface should be smooth and clean, solid and dense, and the leaking joint or water leaking point must be chiseled into “V” shape before construction.

â—Ž Construction: The ratio of gray water to water is 1:0.3~0.5. Quickly seal the mixed slurry to the leaking part until it is heated and solidified. Repeat the above steps without stopping the water.

â—Ž After the completion of the wet conservation for about 3 days

The above is about the plugging spirit brand and other related information, if you want to learn more relevant information, please pay more attention to this site, will provide you with more complete, more detailed, updated information information.

 

Which kind of floor drain and odor-resisting effect is good decoration materials brand brush wall paint brand decoration find decoration company okay home brand

5mm SPC Flooring

Anti Slip Vinyl Flooring,5Mm Spc Flooringwith Ixpe,Water-Resistance Spc Flooring,Eir Surface Flooring

Jinan Caiming Wood Co.,LTD , https://www.caimingflooring.com