Spring is coming. I want to live in a new house. Sometimes I don’t care about the carelessness of the decoration workers. Sometimes it is to save money. Some hardware will be installed by myself. If you don’t play with these items, you should be optimistic about the installation method. Can't just install it casually. 1.cylindrical milling cutter End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com
1. Installation of woodworking hardware items
Most wood products need to consider the problem of paint. Therefore, the installation time of the hardware needs to consider the problem of connection with the painter construction. This needs to be considered from two aspects: First, the installation time of the hardware can not be arranged too early, otherwise the painter needs to consider the protection of the hardware too much during the construction; second, when installing the hardware, Be careful not to damage the construction that the painter has completed. Therefore, normal construction is often arranged in such a way that the hardware that needs to be drilled is basically completed before the painter is constructed, or before the main process is carried out (the unlocking holes before the door lock is installed are basically at this stage). The drilling hole of the handle is preferably arranged at this stage as well. After the painter finishes the construction, the woodworker will perform the installation work.
2. Installation of electrical lamps and switch socket panels
The installation of the luminaire and the installation of the switch socket panel should be carried out after the work of painting or wallpapering the wall is completed. There have been cases like this: When a company was working, in order to save personnel expenses, the electrician installed the switch socket too early in the process arrangement, and accidentally cut the panel when using the wallpaper knife to cut the opening of the switch socket panel.
3, sanitary ware and bathroom hardware installation
Due to the current low level of overall management of the home improvement industry, the quality of workers at the construction site is generally poor. Therefore, on some construction sites, there have been too many cases where the installed bathtub was first used by construction workers. In recent years, there have been many complaints in this regard. Therefore, it is recommended that consumers, unless forced to do so, before the start of the project and most construction workers have not evacuated from the site, it is best not to install sanitary ware. Otherwise, it is very likely that the hair left after bathing will be found in your new bathtub.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.