The door is the first guardian to protect family safety in family life. Therefore, consumers are paying more and more attention to the door problem, and the armored door is one of the security door products, which can well surround a family. Safety, especially for good quality armored doors, buy the correct armored doors, and learn to properly install the steel-wood armored doors! With the rapid development of the economy and the improvement of people's living standards, people's awareness of the purchase of doors and decoration has gradually improved, especially in the after-sales service. It is also an important link for the steel-wood armored door to be transported from the manufacturer to the owner after the fine packaging. Therefore, how is the process of installing the steel-wood armored door and the door frame in the installation process? 1. Preparation tools: hammers, rulers, wooden blocks, ropes, pencils, door frames, special solid connectors, etc. 2. Remove the dust: Before installing, you need to set up the wooden bricks, remove the old powder or lime, and leave the original brick wall or concrete wall. 3. Combination: Place the cover plate on the ground, fix it with a special connecting piece, then pull the vertical line to correct the size, and fix the angle bracket with the triangle. 4. Vertical sleeve plate: Before the vertical sleeve plate, the inner wall of the wooden brick and the inner side of the cover plate shall be coated with special glue, and then the cover plate shall be placed in the door hole and the position and verticality shall be corrected. 5. Place the wooden bricks: coat the wooden bricks with special glue, the position of the cushion cover and the wall, and fix the wooden bricks and the cover boards with small nails. 6. Install the door edge line: After the styrofoam is cured (usually 2-3 hours), remove the triangular bracket on the sleeve board, and after the actual door edge line size is blanked, apply the special glue inside the sleeve groove, and then the door The side line and the door panel are lightly fastened and fastened. (If the door edge line and the groove are loosely fitted, you can use the veneer on the inside of the door edge line) 7. Install the door leaf. In accordance with the above installation process, properly install your own steel-wood armored door guards, and protect your family's safety! [ Follow the WeChat public account "Jiuzhengmen window net"; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzhengmen window network exchange group 】 Jiangmen Nichiyo Decorative Material Co.,Ltd. , https://www.nichiyopt.com