Nucleic Acid Extraction Or Purifiation Reagent Nucleic Acid Extraction Or Purifiation Reagent,Nucleic Acid Extraction,Dna Purification Kits For Cells,Gel Dna Purification Kit Guangzhou Baybio Bio-tech Co., Ltd , https://www.gzbaybio.com
2CY stainless steel gear pump structure and scope of application
CY stainless steel gear pump uses: 2CY series stainless steel gear pump is mainly used in a variety of mechanical equipment in the lubrication system for conveying oil for conveying viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) , The temperature below 300 ℃ lubricated oil. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Scope of application: It can be used as transmission and booster pump in oil delivery system. It can be used as fuel pump in transportation, pressurization and injection in fuel system. It can be used as lubrication pump in all industrial fields. Structural features: This series of gear pump gear, shaft, pump, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of 1.5 times the pump rated exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation. Large flow gear pump, gear pump, 缷 oil pump, oil pump, crude oil pump, marine gear pump. Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MP. Mainly used for oil, oil depots, ports, docks, ships and other high-flow oil, unloading.