Indoor LED Linear Tube is not IP65, The led tube is rgb color dmx lighting, can be used as Xtube, mediatube, outdoor tube for creative lighting solutions, such as make a 3D cube. led tube color have rgb color tube, rgbw color tube. Regarding how to program led light, because the light is dmx programming, so ISEELED dmx LED Controller or Artnet Controller are suggested. ISEELED DMX512 led linear tube compete with eurolite led tube, osram led tube, Philips led tube, american dj led tube. The pixel tube have 1led 1pixel, 2led 1pixel, 3led 1pixel, 6led 1pixel. Address setting have two type, one is auto address, another is manual address. That's to say we have led tube auto and led tube manual. Auto led linear tube, you don't need assign dmx address, it's convenience for event show and led light rental. Manual led linear tube, you need assign dmx address by address writer before light up, for DJ club, architecture light, it's ok.
Photo show of Indoor LED Linear Tube:
Indoor Led Linear Tube,Rgb Led Lights,White Indoor Led Linear Tube,Led Linear Lighting For Indoor Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com
Control of feed temperature during hot season
In summer, the ambient temperature tends to be very high, and when combined with the heat generated by workshop equipment, it often results in elevated temperatures of the finished feed. During rainy seasons, the combination of high temperature and humidity can cause the feed to clump together or even develop mold. This not only leads to significant economic losses for the feed mill but also poses serious safety risks to farmers who use the feed.
So, how can we effectively lower the temperature of the finished feed products?
**First, ensure that the cooler is functioning properly.** A well-maintained cooler plays a vital role in reducing the temperature of the material. Increasing the fan speed appropriately can help cool the feed more efficiently. It's also important to clean the air outlet regularly to maintain good airflow and ensure consistent cooling performance.
**Second, extend the cooling time if necessary.** Adjusting the height of the leveler in the cooler can help increase the contact time between the feed and the cooling air, allowing for more effective temperature reduction. This small adjustment can make a big difference in maintaining optimal feed quality.
**Third, consider slowing down the granulation process.** If the granulation speed is too fast, the feed may not have enough time to cool properly before being packaged. By slightly reducing the feeding and granulation speed, you allow more time for the feed to cool down, which helps prevent overheating and ensures better product stability.
**Fourth, the packager should monitor the temperature closely.** In addition to the above steps, continuous monitoring before packaging is essential. The packager should check the temperature of the feed regularly. If the temperature is too high, they should immediately stop the packaging process and notify the central control and maintenance teams to take corrective actions. This proactive approach helps avoid quality issues and ensures safe handling of the feed.
By implementing these measures, feed mills can significantly improve the quality and safety of their products, especially during hot and humid weather conditions. It’s all about staying vigilant, maintaining equipment properly, and making small adjustments that lead to big improvements in the long run.