Lightweight Wallboard Material Features How to Install Lightweight Wallboard Materials

People like to use lightweight wallboard materials at home, because they are not only affordable, but also can change the pattern to meet people's demand for home improvement. What are the characteristics of lightweight wallboard materials ? How to install lightweight wallboard material ? Let's take a look with Xiao Bian!

Lightweight wallboard material features:

1, light weight

The weight of the lightweight wallboard is 1/4 of the red brick and 1/5 of the concrete, which can effectively reduce the weight of the building and at the same time reduce the economic investment.

2, soundproofing

Lightweight wallboard materials can be 40-50 decibels, and are widely used in office, commercial, entertainment, residential and other places.

3, good anti-seismic effect

The lightweight wall plate has a low elastic modulus, fast shock absorption, and an anti-seismic rating of up to 8 levels.

4, thermal insulation

The thermal conductivity of lightweight wallboard is 0.12W/mk, which is only 1/10 of that of concrete, which can greatly reduce the frequency of heating and air conditioning.

5, easy construction

Lightweight wall panels can be drilled, sawed, nailed, and can be freely adjusted in size to facilitate the installation and embedding of hydropower pipelines.

6, economical

The light weight of the lightweight wall panels and the thin walls can reduce the load on the buildings and increase the area of ​​use of the occupants. After calculation, the indoor use area can be expanded by 3% to 5%.

7, good environmental protection

Lightweight wallboard raw materials are inorganic materials, which are harmless to the environment and human health after use. They are environmentally friendly building materials products.

How to install lightweight wallboard material:

1. When installing, always check the flatness and verticality.

2. The laying of water and electricity pipes shall be synchronized with the installation of the wallboard. When the wallboard surface is to be opened, the hole must be drilled first. The hole shall not be larger than 80mm×80mm. The plumbing hanging parts shall not exceed 80kg. The hanging parts exceeding 80kg must be installed. On the wallboard embedded part.

3, electrical switches, sockets around, to use filler stuffing.

4. After the wallboard is installed, it must wait for the bonding material to dry before proceeding to the next step.

5. Check the geometric dimensions of the partition board to meet the standard requirements.

6, according to the layout, to 40 × 50 × 90L iron fixed in the corresponding position.

7, according to the layout, starting from the side of the installation. If there are door and window openings in the wall panels, install the doors from both the door and window openings to the sides. Align the ink line, use the crowbar to move the bottom, the upper end is tight, the edge of the board is tight, the bottom is fastened with a wooden wedge, and the reinforcement is added.

8, the installation of a good wall surface shall not appear from the skin, falling angle, hollowing and cracks and other phenomena.

Article Summary: The characteristics of lightweight wallboard materials and how to install lightweight wallboard materials are introduced here. If you need to know more information, please continue to pay attention to this site. We will have more exciting content for you. Offered.

Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system.  Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.

Transmission And Distribution Pole

Transmission And Distribution Pole,Transmission Line Poles,Power Transmission Line,Galvanized Transmission and Distribution Pole

Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com