The advantages of the input type liquid level meter are: high measurement accuracy; easy installation; the signal can be remotely transmitted. The advantages of the remote-controlled liquid level meter are: high measurement accuracy; easy installation; the signal can be remotely controlled; The material resists corrosion of various media; it is suitable for explosion-proof occasions; the price is moderate. It is a liquid level measuring instrument composed of a gas collecting cylinder, a pressure guiding tube and a sensor. When the air cylinder sinks into the liquid to be tested, the air in the air cylinder is subjected to the pressure of the liquid to be measured, and the pressure is transmitted to the sensitive component through the pressure of the pressure guiding tube to measure the liquid level change, and the sensor does not directly act on the measured medium.
The xunda Pipe Double Side Adhesive Tape is a cold applied tape used for the corrosion protection oil , gas ,water underground or overhead pipeline . It is also called double sided butyl rubber anti-corrosion tape.
The XUNDA Liquid Adhesive can be used as primer for this tape. The liquid adhesive represent an anti corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of double sided tape to the pipe .
The Pipe Double Side Adhesive Tape shall be applied after liquid adhesive and before the pipe Protection Tape.
The composition of the Pipe Double Side Adhesive Tape consists of four layers, internal adhesive layer,external adhesive layer , film backing and interleaving.
Internal adhesive : Butyl rubber
External adhesive : Butyl rubber
Film Backing: Special blend of stabilized polyethylene
Interleaving:Anti-adhesive film treated with silicone
.jpg)
The pressure is transmitted to the sensor through the air guiding tube, which avoids the direct contact between the sensor and the measured medium, adapts to high temperature and strong corrosiveness, etc., and effectively solves the problems of high temperature, corrosive liquid and sewage liquid level measurement. The input type liquid level meter is especially suitable for measuring liquid level in metallurgy, electric power, papermaking, petroleum, chemical and other industries. It is a mature liquid level measuring instrument. It is not affected by media foaming, deposition, turbidity, etc., and has no moving parts, and is easy to install and maintain. The input level gauge uses the piezoresistive effect of diffused silicon or ceramic sensitive components to convert static pressure into electrical signals. After temperature compensation and linear correction, it is converted into a 4-20mA standard current signal output. The sensor part can be directly put into the liquid, and the transmitter part can be fixed by flange or bracket, which is very convenient for installation and use.
Huajiang Automation can provide you with the most professional selection suggestions and the most reliable instruments. If you have any questions, we will have professional technicians to help you answer them. I hope to help you!
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Pipe Double Side Adhesive Tape
Butyl Rubber Adhesive Tape,Pipe Double Sided Adhesive Tape,Pipeline Double Sided Adhesive Tape,Double Side Butyl Rubber Tape
Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com