When out and about or walking to and from school, the Children Safety Vest is the accessory for children to be seen in. Garments are available for ages from 3-4 to 11+. We ensures that the wearer will be outstanding in day and night. All items are manufactured to EN1150 and are CE marked. You can order our existing style of safety vest, but also, they can be customized. Children Safety vest Children Safety Vest,Child Safety Vest,Led Safety Vest,Safety Waistcoat ZhongKe Reflective Material Co.,ltd , https://www.zkprotective.com
Fault check: Remove the bottom cover of the clutch, hang the transmission into neutral, and press the clutch to the end. Then, use a screwdriver to pull the driven plate. If it is easy to turn, it means that the clutch is well separated; if it cannot be moved, the clutch is not completely separated.
Troubleshooting:
1 Check if the free travel of the clutch pedal is too large and adjust it.
2 Check whether the height of the separation lever is consistent or not too low. Under the car toggle separation fork, so that the front end of the release bearing gently lean on the end face of the separation lever, rotate the clutch one week to view, if the separation of the inner end of the lever can not contact with the separate bearing, indicating that the height of the separation lever is inconsistent , should be adjusted. If the separation lever is of the same height and the separation is still not complete, check the lever height. Distribute the levers to the same height. If they can be completely separated, the original adjustment is improper or the wear is excessive. After the release lever adjustment, the free travel of the clutch pedal must be re-adjusted.
3 If the above adjustment is normal and the separation is still incomplete, remove the clutch and check whether the driven plate is installed in reverse, axial movement is difficult, whether the main driven plate has warpage, whether the separation lever screw is loose, whether the floating pin is Fall off.
4 For the newly riveted friction plate clutch, check if the driven plate and the friction plate are too thick. If it is too thick, add a spacer between the clutch cover and the flywheel.
5 For hydraulically-actuated clutches, in addition to the above checks, it is also necessary to check for lack of brake fluid, leaks in the piping and discharge of air in the hydraulic system. Auto Repair Home
Detection and Elimination of Difficulty of Gear Difficulty When Trailer Engine Is Idling
Fault phenomenon: When the car engine is running at idle speed, although the clutch pedal has been stepped to the end, it is difficult to provide gear, and the transmission gear has a crash sound. After reluctantly putting on the gear, the clutch pedal has not been released and the car has been driven or turned off.